PRODUCTS CENTER

10000 psi abrasive blast hose size

4 best shop practices for abrasive blasting - The …

So if you have 120 PSI in a blast hose when it comes out of the blast equipment, you have only 75 PSI at the nozzle. By switching to a 1.5-in.-ID blast hose, that pressure loss could be as low as 6 PSI, meaning you would be maintaining well in excess of 110 PSI at the nozzle.

Aluminum Coupling

Abrasive Blast Equipment > Hose Couplings & Nozzle Holders > Aluminum Coupling Aluminum Coupling Click to view a larger image Aluminum Blast Hose Coupling, working pressure 150 PSI. Manufactured to accepted industry standards and inter-changeable

Suction-Feed Blasters | McMaster-Carr

Nozzle Tip ID (No. of) Air Consumption Nozzle Material ID Material For Manufacturer For Manufacturer Model No.Required Air Pressure, psi For Air Hose ID Pipe Size Thread Type For Use With Each A 3/16" (1) 5/16" (1) 18 cfm @ 90 psi 6 cfm @ 90 psi Steel 3/32 "

Info Tools - Raptor Blasting Solutions

15/5/2019· Internal Area Loss Due to Hose Size Reduction Minimum Air Volume Table Air volume requirements at 100 PSI for a complete blast system. Minimum Compressor Air Line Sizes Minimum Connector ID by Nozzle Orifice Size Pipe ID-Area-Nozzle-Size Typical ID

Clemco Abrasive Blast Machines - Nozzle Chart

When choosing a nozzle size, its size is dependent on a variety of factors: the blast machine capacity, the piping, the hoses, and—most importantly—air volume. If you don’t choose the right nozzle size, your production will suffer. Check out our nozzle size

ALC Portable Abrasive Pressure Blaster-40001 - The …

This ALC abrasive pressure blaster is perfect for a wide variety of surface preparation jobs such as removing paint, scale, rust and oxidation. It features an 10 ft. heavy-duty Goodyear blast hose designed Create an Account Track orders, check out faster, and create

Sandblasting & Abrasive Blasting Equipment & Parts - …

IDS Blast provides Sandblasting Supplies & Sandblasting Parts. IDS Blast is the premier solution for all things sandblasting, with 20 years experience in the abrasive blasting industry. Product Notes: SURVIVOR® HOSE COMPOUND HAS BEEN TESTED TO DELIVER TWICE THE LIFE OF STANDARD ABRASIVE BLAST / SUCTION HOSE ON AVERAGE*.

Reusing Abrasive Media in Blast Cabinets for Max …

Reusing abrasive media is a process that can happen in blast cabinets and other contained blast enclosures. For portable sandblasting and outdoor blasting, the used media is too difficult to collect, filter, and reuse, so that media generally gets disposed.

Portable Blasting Systems

u Portable Blasting Systems Custom systems designed to meet specific needs Recognized and trusted around the globe, Schmidt portable blasting systems are designed to provide the lowest pressure drop while using a wide range of media. Available in packages

Sand Blasting Equipment, Abrasive Blasting, Media …

The #1 source for quality aftermarket abrasive blasting parts & supplies Search > COUPLINGS > BLAST HOSE COUPLINGS STANDARD > Q-3-AL Part Nuer Q-3-AL Description QUICK COUPLING, ALUMINUM, 1-1/4", 150 PSI MAX Put-up 1 0.8 lb. (0.363

ALC Abrasive Portable Blast Kit-40015 - The Home Depot

Hose length 10 ft. Unlimited capacity Easy setup Steel nozzle sizes included two 13/64 in. and one 1/4 in., air jets included one 5/64 in. and one 1/8 in. 7 CFM at 80 PSI with 13/64 in. gold nozzle; 15 CFM at 80 PSI with 1/4 in. silver nozzle Hose size: 3/8 in. I

Blast Hose : Kuriyama Blast Hose - United Western Denver

Alfagomma® T750AA075X50, T750AA / T750AG - 150 PSI 4-Ply Abrasive Material Blast Hose Appliion : Designed to convey abrasives, sand and shot blast material. Cover : Black or green, conductive SBR/NR blend-abrasion and ozone resistant-pin pricked.

ALC Portable Abrasive Pressure Blaster-40005 - The …

This ALC abrasive pressure blaster is perfect for a wide variety of surface preparation jobs such as removing paint, scale, rust and oxidation. Features an 25 ft. heavy-duty Goodyear blast hose featuring a quick disconnect, is designed for long life and maneuverability.

Soda Blaster/sand Blaster/abrasive Blaster - Buy Soda …

• 15 m Blast Hose(32mm diameter) • Deadman Activator Valve • Boron carbide Nozzle(10mm) • Fill Funnel with Screen • Lifetime Warranty on Blast Pot Size after packaging: 1.07*1.02*1.73m=1.89CBM, net weight: 250kg, gross weight: 320 kg

Sand Blasting Equipment, Abrasive Blasting, Media …

HOSE SIZE 1/2" TO 1", HOSE TO HOSE 520-812 HOSE, BLAST, BLACK, NOMINAL 3/4" ID x 1-1/2" OD, 2 PLY, WP 150 PSI, COUPLING/NOZZLE HOLDER SIZE 1, PRICE PER FOOT 520-812GN HOSE, BLAST, GREEN, NOMINAL 3/4" ID x 1

Park Derochie USA > What We Do > Abrasive Blasting

We are also capable of water blasting with 2,000 – 5,000 psi units as well as high pressure water washing at 10,000 psi and ultra high pressure water jetting at 40,000 psi. Portable buildings on wheels are available allowing for environmental & personnel protection for onsite abrasive blast cleaning as well as coating of steel and structures.

How to Choose the Right Blast Nozzle - Graco

For vapor abrasive blasting, the most commonly-used nozzle orifice sizes range from 3/8" inner diameter to 3/4", increasing by increments of 1/16". A 3/8" nozzle is sufficiently constricted to produce a effective blast pressure with a 185 CFM compressor. A 1/2

Abrasive Blast Equipment | Clemco Industries Corp - SINGLE CHAER BLAST …

specifically manufactured for blast cleaning, and that are compatible with the surface being blasted. Abrasive produced for other appliions may be inconsistent in size and shape, and contain particles that could jam the abrasive metering valve, or cause 1.4.2

10K PSI Waterblast Hose - Industrial Rubber Hose …

10K PSI Waterblast Hose 10K PSI Waterblast Hose ISO 9001 MFG Very high pressure hose for water scaling and jetting systems. NEW PART NO. WB10K LEGACY PART NO. 10KWB Need Help? View our product spec chart or contact us. Need a large order

WESTWARD Pressure-Feed Ceramic Abrasive Blast …

Looking for WESTWARD Pressure-Feed Ceramic Abrasive Blast Nozzle for 10Z920 (10Z924)? Grainger''s got your back. Price $3.17. Easy online ordering for the ones who get it done along with 24/7 customer service, free technical support & more.

High Pressure Abrasive Blast Cabinet 42000 - Northern Tool

High Pressure 6 Operating Instructions and Parts Manual 42000 Abrasive Blast Cabinet Assely 1. Fasten the four legs and the Leg Reinforcements to the Bracket b y us ing M8*20mm bolt , Flat Washer, lock Washer and M8 Nut, tighten . Hardware 2.

EcoQuip 2 EQp - Blastall Equipment & Supply

150 psi Operating Temperature 35˚ - 110˚ F Recommended Compressor Size+ 185 CFM Blast Hose Size (supplied) 1" ID Abrasive Capacity* 220 lbs. Dry Weight 220 lbs. Wet Weight* 500 lbs. Pressure Pot Volume 2 cubic feet Water Tank Volume N/A Air Inlet

Sand Blasting Equipment, Abrasive Blasting, Media …

Image Description SBS SCREWS, PACK OF 100 SPARE SCREWS 520-812 HOSE, BLAST, BLACK, NOMINAL 3/4" ID x 1-1/2" OD, 2 PLY, WP 150 PSI, COUPLING/NOZZLE HOLDER SIZE 1, PRICE PER FOOT 520-812GN HOSE, BLAST

ALC 90 lb. Portable Pressure Abrasive Blaster With Starter …

Includes 90 lb. pressure blaster, 25 lbs. of coal slag abrasive, blast hood with 5 in. x 6 in. lens, 5 extra 5 in. x 6 in. lens, standard size abrasive strainer, 5 extra sealing blocks and (1) 1/8 in. and (1) 3/32 in. nozzle, user manual 80 - 125 psi operating range

High Water Blasting - Ultimate Washer

Versatile appliions offering 5,000 PSI to 15,000 PSI of blast pressure so your operator can set the pressure he needs to get the job done effectively. VARIABLE SPEED DRIVE: Easy to use controls allow operator to set water blast pressures for various appliions - anywhere from 5,000 psi to 15,000 psi .

CLEARBLAST 450 | CLEARBLAST

185cfm @ 100 psi – 600cfm @ 150 psi Vessel/Media Capacity 4.5 Cubic Ft. Vessel / 350 lbs. Abrasive (garnet) Nozzle Size #8 Nozzle Included Hose Length 50 Ft. Blast Hose Standard, Up To 200 Ft. with Extension Hoses Air Supply Fitting Type 1-1/2″ 4

Sand blasting Nozzle | Sand blasting Nozzle price in India

Sand blasting Nozzle Size For sand abrasive blasting, the most commonly-used air blast nozzle from 3/8″ inner diameter to 3/4″, increasing by increments of 1/16″. An 8mm air blast nozzle is constructed to generate pressure at 120 CFM air compressor.

Graco EcoQuip 2 EQp | Vapor Abrasive Blast Equipment …

Abrasive Capacity (lb) 220 Air Inlet Size (in) 3/4 Air Inlet Thread Type NPT Blast Hose Inside Diameter (in) 1 Blast Hose Length (ft) 50 Compatible Abrasives Garnet, Crushed Glass, Coal Slag, Glass Beads, Plastic, Walnut Shells, Baking Soda Configuration Mobile

Blast Nozzle Testing Tools - Manus Abrasive Systems Inc.

Blast Nozzle Orifice Gauge Hand held gauge for measuring the bore/orifice size in inches and air consumption (CFM @ 100 PSI) of an abrasive blast nozzle. Stock # …

FD69 Series/ Arc Latch™ - High Pressure Water Blast …

The FD69 Series "Arc Latch " design has a greater surface contact area for long service life in rugged high-pressure and water blast appliions. The maximum operating pressure is 10,000 psi with 40,000 psi minimum burst pressure. Safety sleeve lock guards